Skip to main content

DIFFERENT SHAPE OF BRICKS-BRICK SHAPES FOR CONSTRUCTION.

B13

Brick is a major component of building construction. There are many types of brick shapes currently available in the market. These brick shapes are used to improve the aesthetic appearance of the building

Brick shapes

The brick shapes can be classified into different types they are

1. Bullnose brick

Bullnose brick is the brick with one rounded angle. The connection formed when a wall finishes a turn is called quoin. Bullnose brick is used to make rounded construction purposes. This is one of the commonly used brick shapes. If two sides of the brick are rounded then it is known as double bullnose bricks. The bullnose bricks are shown in the above picture.

2. Channel bricks

Channel bricks are made in the shape of the channel. The channel bricks are used for drainage purposes. The Channel bricks are shown in the above picture.

3. Cow nose bricks

Hollow bricks are also known as cavity bricks. Hollow bricks have a wall thickness of 20cm to 25cm. Hollow bricks are the most used brick shapes in construction.


4. Hollow Bricks 

A hollow clay masonry unit whose net cross-sectional area in every plane parallel to the bearing surface is not less than 60% of its gross cross-sectional area measured in the same plane. 2. (Brit.) A brick having holes through it which total at least 25% of its volume, the holes being not less than 3/4 in.

 5. Curved bricks

Curved bricks are in the form of a curved sector. Curved Bricks are commonly used in the construction of a circular pillar.


Tell us: What do you wish you understood about the above blog? 

(tell us in comment) 

we provide free of cost first cut consulting

If you want to need a free consultant then click on below-mentioned links,



Was this article helpful?  

Labels:

Comments

Post a Comment

If you have any doubts, Please let me know.

Popular posts from this blog

WHICH TYPES OF CONCRETE ARE USED IN DIFFERENT STRUCTURE?

 B15 The different types of Concrete generally used in typical Construction of structures are as follows: Sulphate Resisting Concrete (SRC)/ Plain Cement Concrete (PCC) – Used for non-structural works such as Blinding, Screeding, and Protection works. Generally, this is low strength concrete with a mixed design of M15 or M20. Microsilica Concrete – Typically used for Substructure Construction. Microsilica Concrete is generally preferred for elements in contact with soil or water. This type of Concrete is preferred in Rafts, Basement Slabs, Piles and Pile Caps, Retaining walls, etc. High Strength Concrete – This type of concrete does not have any special additive but is designed for load-bearing elements such as Columns, Shear walls, transfer beams, etc. Mix designs may vary from M45 to M70 based on strength requirements. Waterproof Concrete – In this type of concrete, a waterproof admixture is added to concrete during batching to impart waterproofing properties in concrete. This ty...
Post a Comment
Read more

WHY IS STEEL EXTENSIVELY USED WITH CONCRETE?

 B17 Steel & Portland cement actually have similar thermal expansion rates. It’s really an awesome serendipitous discovery. Modern life would not be possible. Highrise buildings, highways, bridges, tunnels, piers, and dams. The reason brick fell out of favor was that it had a different rate than Portland cement mortar. Thus the freezing & thawing cycle led to cracks. For centuries bricks were bonded with lime mortar. They actually have similar thermal expansion rates too. Now the problem is that steel corrodes. Leading to spalling. So older structures are modified by connecting the steel to sacrificial anodes like zinc. Or by using fiberglass/resin reinforcing bars in new constructions. So far I haven’t seen any articles about the downsides to this combination. Tell us:  What do you wish you understood about the above blog?  (tell us in comment)  we provide free of cost  first cut  consulting If you want to need a  free consultant  then cl...
Post a Comment
Read more